Be yourself; Everyone else is already taken.
— Oscar Wilde.
This is the first post on my new blog. I’m just getting this new blog going, so stay tuned for more. Subscribe below to get notified when I post new updates.
2020 Diaphragm Wall Project & Past
Happy New Year 2020! All
The Diaphragm Wall project is getting hot in Singapore and other countries. Same time, the maintenance spare parts for machine and wear parts are getting important issue to continue next project in Singapore, Hongkong, China and Middle East market.
Let’s see the project in which the Wonkang Tungsten tool is used(or using).
| Singapore | Hongkong |
| DTL901 | HKIA C3203(DCM) |
| T3008 | HKIA C3204(CRBC JV) |
| MS Project | HKIA C3204(DCM) |
| TSL223 | HKIA C3205(CSM) |
| TSL226 | Hongkong Link Road |
| TEL307 | SCL C1109 |
| TEL308 | WAN CHAI C002 |
| TEL305 | SR8 Project |
| TEL301 | SCL C1123 |
| C821A | CrossBaylink |
| NSC106 | |
| NSC101 | |
| NSC103 | |
| PunggolDigitalDis. | |
| NSC102 | |
| NSC109 |
Therefore the most popular item is following,
WK38-JM (18071,372437) which is 100 % compatible with Bauer Teeth & Holder and More innovated designed performance. SB 38-JM is traditionally popular BC cutter teeth, but, WK38-JM applied the market feed back (for last 30 years experience). It’s more efficiency and supports to saving the cost of your D-wall project site. All of BC operator voice is matters. 🙂
Why Big scale of D-wall project site using the Wonkang Tungsten BC Tooth and Holder?
1. All products are 100% Compatible with Bauer BC Cutter Teeth and Holders
2. Listen the BC Operator’s voice and applied the products
3. Discuss with Project procurement manager to enhance the D-wall machine performance and cost of wear parts.
4. Provide all kind’s of BC cutter teeth and Holders
5. Super efficiency products quality, if you try it once, you can not choose your previous products in your project site.
6. 30 years manufacturing experience for BC teeth, All of Korean D-wall construction company’s choice.
This is year, Wonkang Tungsten will approach your D-wall place more closer. IF you use original products for a long time, it’s time to discuss with Wonkang Tungsten. It can help to catch performance and saving the cost. The sales team will support your project site by visiting or real-time communication.
Wonkang Tungsten
Sales Manager : Mr.Kang / Tae-young
E-mail : sales@roadbit.com
Whatsapp / Mobile : +82-10-8503-7111
AUGER TOOLS (AUGER BIT)
Wonkang Tungsten Auger Bit & drilling tools can be used in a wide range of foundation drilling attachments and geotechnical conditions. When drilling with an Auger in soil or rock cutting conditions, our tools offers a wide range of products that maximize productivity, minimize wear, and boost overall performance.
- Dimensions shown in millimeters.
- Tooling solutions can be customized for your application.
Contact : sales@roadbit.com / http://www.roadbit.com
Best Choice of BC Cutter for Diaphragm wall Trench cutter
There are many kinds of BC cutter (Bauer cutter or BC Teeth / Tooth). You can see what is best choice for your construction site. It depends on your diaphragm wall equipment or soil condition.
If your diaphragm wall cutting wheel is standard model, you have to see various kinds of bc cutters (bc tooth). Or not, I will give another option for you. visit to http://www.roadbit.com
Standard Cutter Teeth / Tooth for Diaphragm Wall
BC Tooth WK 38 JM and WK 42 JR/ JL
This cutting tooth is suitable for excavating clay, cobbles (diameter greater than 50 mm), sand, weathered rock and hard rock.
The tungsten carbide of the JM type tooth is designed to maximize the cutting performance and therefore more efficient than other type in crushing boulders. The JR and JL Type are mounted at the outer edges of the cutting wheels to ensure the necessary over-cut. The tungsten carbide is hard and tough.
BC Tooth WK 46 JR/ JL
Clamping Sleeve Long version compare than WK 42-JR/JL
BC Tooth WK 38 JMK
The tungsten carbide tip is installed horizontally
with the BC Tooth surface
BC Tooth WK 38 ZM
These cutting teeth are suitable for excavating
homogenous and sandy soil as well as clay,
cobbles (max. diameter 50 mm), sandstone,
weathered rock and hard rock.
Each Teeth has their own characters to support your diaphragm wall construction site, Wonkang Tungsten (www.roadbit.com) could provide many options of BC teeth / tooth model to you. You can contact any time. < sales@roadbit.com >
How to choose the Diaphragm wall cutter or Chisel?
To achieve optimum performance when excavating diaphragm walls using trench cutters, the choice of cutting teeth is of fundamental importance.
The type of tooth or chisel that performs best is governed by
soil conditions at the site. There is a range of different types of cutting teeth and round shank chisels available to suit local conditions.
When soil conditions change over the depth of the diaphragm wall, a mix of different cutting teeth or round shank chisels can be fitted to the corresponding wheel.
Round shank chisels are suitable for excavation of sand, cobbles, weathered rock and hard rock but not suitable for clay. Because of the smaller diameter of the tungsten carbide insert the tooth has a higher penetrating power.
Therefore, depend on your soil condition, you can choose your diaphragm wall equipment’s wheel type.
However, it’s not enough to make your decision. You have to consider the grade/type of Tungsten carbide on your tool.
This latest carbide grades is manufactured using an innovative process technique with completely new raw materials. The creation of this
carbide, with a significantly stronger carbide matrix and a perfect grain size configuration, has contributed to the superior toughness and
high-temperature wear resistance experienced in operations and tests.
All grades are now available in Wonkang Tungsten tools.
BC Tooth Tips provide excellent penetration for diaphragm wall. These tips are best suited for use in soft to hard materials or conditions with Trench cutter.
The Cap carbide tips provide excellent penetration. These tips are best suited for use in soft to medium-hard materials or conditions.
Insert carbide tips are best suited for penetration applications. These tips are ideal for use in hard, high impact conditions.
There are no fixed rules. Depend on your budget, soil condition, equipment, your professional engineers will decide best option.
Normally, Diaphragm wall construction is very very expensive method. That’s true, But, When you meet Wonkang Tungsten (www.roadbit.com), your cost matter is easily solved.
Wonkang Tungsten provide best efficient tools for diaphragm wall / Foundation drilling construction.
Introduce Yourself (Example Post)
This is an example post, originally published as part of Blogging University. Enroll in one of our ten programs, and start your blog right.
You’re going to publish a post today. Don’t worry about how your blog looks. Don’t worry if you haven’t given it a name yet, or you’re feeling overwhelmed. Just click the “New Post” button, and tell us why you’re here.
Why do this?
- Because it gives new readers context. What are you about? Why should they read your blog?
- Because it will help you focus you own ideas about your blog and what you’d like to do with it.
The post can be short or long, a personal intro to your life or a bloggy mission statement, a manifesto for the future or a simple outline of your the types of things you hope to publish.
To help you get started, here are a few questions:
- Why are you blogging publicly, rather than keeping a personal journal?
- What topics do you think you’ll write about?
- Who would you love to connect with via your blog?
- If you blog successfully throughout the next year, what would you hope to have accomplished?
You’re not locked into any of this; one of the wonderful things about blogs is how they constantly evolve as we learn, grow, and interact with one another — but it’s good to know where and why you started, and articulating your goals may just give you a few other post ideas.
Can’t think how to get started? Just write the first thing that pops into your head. Anne Lamott, author of a book on writing we love, says that you need to give yourself permission to write a “crappy first draft”. Anne makes a great point — just start writing, and worry about editing it later.
When you’re ready to publish, give your post three to five tags that describe your blog’s focus — writing, photography, fiction, parenting, food, cars, movies, sports, whatever. These tags will help others who care about your topics find you in the Reader. Make sure one of the tags is “zerotohero,” so other new bloggers can find you, too.
Roadbit's Foundation Drilling Tools 